Martel-electronics BETA LDT-500 Manuel d'utilisateur télécharger pdf

BETA LDT-500

Dirt/Moisture Trap

with Precision Vent

Operating Instructions

Warning: The LDT-500 is designed for use

with Pneumatic Systems Only!

Pressure Connection:

Outlet: 1/8" NPT Male Thread with O-Ring seal

Inlet: Universal 1/8" NPT Female or 1/8" BSP Female Thread

Maximum Working Pressure:

500 psi/35 bar.

Orientation:

The LDT-500 is designed to be used vertically and should

be removed from the calibrator when not in use.

Media Compatibility:

Electroless Nickel over brass, Acrylic, Cast Urethane and Nitrile (Buna-N)

O-Ring seals.

Operation:

1. Fit the LDT-500 to the test port of the calibrator,

hand tighten only, the o-ring at the base of the

1/8" NPT male thread will make a proper seal.

Try to orient the LDT-500 so that the vent con-

trol is in position to allow ease of use.

2. Connect the equipment under test to the upper

port on the LDT-500, using a suitable sealing

method. Use a 7/8" or 23mm back up wrench

on the hex section nearest the upper port when

connecting to the LDT-500 inlet.

3. When you are ready to operate the calibrator

make sure to close the vent on the LDT-500

and the vent on the calibrator. When using the

LDT-500 the vent knob on the calibrator can remain in the closed position. All

venting should be done using the vent on the LDT-500 to prevent liquids

from entering the calibrator.

7/8" or 23mm

back up wrench

1 2

Résumé du contenu

Page 1 - Dirt/Moisture Trap

BETA LDT-500 Dirt/Moisture Trap with Precision Vent Operating InstructionsWarning: The LDT-500 is designed for use with Pneumatic Systems Only! Pr

Page 2 - Cleaning/Assembly:

0219872 Rev B 12/11 Martel Electronics Corporation3 Corporate Park Drive, Unit # 1Derry, NH 03038 www.martelcorp.com • e-mail: [email protected]

Commentaires sur ces manuels

Pas de commentaire

Martel-electronics BETA LDT-500 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Martel-electronics BETA LDT-500. Martel Electronics BETA LDT-500 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Martel-electronics BETA LDT-500